Hammer Unions 02

These low pressure unions are ideal for manifold and applications where CWP does not exceed 1000 PSI.

These unions are best suited for medium pressure ranges involving air, water, oil & gas service for cold working pressure upto 2,000 PSI. (For dimensions see fig. 206). Upto 4” no O-ring is used on the male sub. Beyond 4” size, an O-Ring is used on the male sub for sealing.

These unions have an additional ‘O’ ring on the spherical surface of the male sub providing a leak proof seal. All dimensions of fig:- 200 & Fig-206 are identical.

Size (in) A B C ACME (TPI) Union
LBSF		 Weight
KGF
in mm in mm in mm
1 1.60 40.5 1.95 50 2.57 65 6STD 1.75 0.79
2 2.74 69.5 2.91 74 3.66 93 3MOD 5.73 2.60
2-1/2 3.30 84 3.81 97 4.29 109 3MOD 9.47 4.32
3 4.09 104 4.09 104 4.88 124 3MOD 13.33 6.05
4 5.19 132 5.00 127 5.78 147 3MOD 19.84 9.00
5 6.37 162 5.75 146 6.03 153 4STD 33.00 15.00
6 7.36 187 6.92 176 6.71 170.5 3STD 46.00 20.90
8 9.52 242 8.00 203 7.20 183 3STD 61.72 28.00
Size (in) A B C ACME (TPI) Union
LBSF		 Weight
KGF
in mm in mm in mm
1 1.59 40.5 1.96 50 2.55 65 6STD 1.76 0.80
1-1/4 2.00 51 2.11 53.6 2.79 71 6STD 2.20 1.00
1-1/2 2.28 58 2.52 64 2.73 69.5 6STD 2.42 1.10
2 2.79 71 2.91 74 3.54 90 4STD 5.00 2.30
2-1/2 3.30 84 3.87 98.5 4.25 108 4STD 9.25 4.20
3 4.17 106 3.89 99 4.52 115 4STD 13.67 6.20
4 5.23 133 4.52 115 4.96 126 3MOD 18.52 8.40
5 6.32 162 5.75 146 6.03 153 4STD 33.00 15.00
6 7.50 190.50 6.06 154 6.65 169 3STD 42.50 19.30
8 9.56 243 7.18 182.5 7.15 181.5 3STD 61.70 28.00
10 11.49 292 9.01 220.7 9.09 231 3STD 90.39 41.00