Tubing Head Spools

Tubing Head Spools

Tubing Head Spools bodyhave a straight bore with a 45 deg landing shoulder. While the top flange has hold down screws asstandard equipment for securing tubing hanger, thebottom flange is designed for installation of bottom pack – off BP-1 & BP – 2 (PPsealfor high pressure over 5000 PSI) and isprovided with bit guide, a plastic packing injectionport with bleeder outlet and a test port. This canaccept Tubing Hangers Mandrel Type ‘THSM’,Wrap around type ‘THSW’ and Extended necktype ‘THSE’. Standard outlets are 2 1/16” 2000 - 10000 PSI WPstudded. Even 2” Line Pipe & Flanged outlets canalso be provided. Studded outlets are threadedinternally for the valve removal plugs. Top flange isprovided with hold down screws to secure tubinghanger.

Flange Size Overall Height (H) Height of Side Outlets (h) Minimum Bore (dia A) Top Flange Bore (Dia B)
Bottom WP (PSI) Top WP (PSI)
9 2000 7 1/16 2000 16 7 15/16 6 1/2 7 1/32  
9 2000 7 1/16 3000 16 7 15/16 6 1/2 7 1/32  
9 2000 7 1/16 3000 16 7 15/16 6 13/16   7 1/32
9 3000 7 1/16 5000 16 8 15/16 6 13/16   7 1/32
11 2000 7 1/16 2000 16 8 15/16 6 13/16   7 1/32
11 2000 7 1/16 3000 16 8 15/16 6 13/16   7 1/32
11 3000 7 1/16 3000 19 1/2 10 1/2 6 13/16   7 1/32
11 3000 7 1/16 5000 22 7/8 12 3/8 6 13/16   7 1/32
11 5000 7 1/16 5000 23 /1/2 10 3/4 6 13/16   7 1/32
11 2000 9 2000 16 8 1/6 8 1/16 8 3/4  
11 2000 9 3000 16 8 1/6 8 1/16 8 3/4  
11 3000 9 3000 19 1/2 10 1/2 8 1/16 8 3/4  
11 3000 9 5000 22 7/8 12 3/4 8 1/16 8 3/4  
11 5000 9 5000 25 12 3/4 8 1/16 8 3/4  
11 5000 7 /1/16 10000 25 12 3/4 8 1/16 7 1/32  
11 5000 9 10000 25 12 3/4 8 1/16 8 3/4  
11 10000 7 /1/16 10000 26 3/8 12 3/4 6 3/8 7 1/32  
11 10000 7 /1/16 15000 27 3/8 12 3/4 6 3/8 7 1/32  


Note : All Dimensions are in Inches.